A Comparison of Our Product to Similar Systems
| Function or Benefit | RSEC | Gilbarco | FE Petro | Red Jacket | Esco | Brown/Sq D |
| 100% elimination of feedback 24/7 | Yes | Yes | Yes | Yes | Yes | Yes |
| Visual indication (Input LED's) of ON / OFF status of each dispenser control wire. | Yes | No | No, see comment | No, see comment | No | Yes? |
| Diagnose submersible control voltages without tools or meters | Yes | No | No | No | No | Yes? |
| Output indicators | Yes | No | Yes | Yes? | No | Yes? |
| Output TEST - OFF - AUTO switches | Yes | No | No | No | No | No? |
| Start a line leak test without turning ON a dispenser. Some line leak tests require turning ON a dispenser to start the test. | Yes | No | No | No | No | No |
| Output disable. This is used to disable input voltages to an electronic line leak detection system, when a site is not 24 hours, and the dispensers and submersible pumps must be left ON. | Yes | No | No | No | No | No |
| Submersible motor relay included | No | Yes | Optional | Yes | Optional | Yes |
| Simplified Healy and Hasstech wiring | Yes | No | No | No | No | No |
| Units needed per site | 1 | 1 per Product | 1 per Product | 1 per Product | 1 per Product | 1 |
| Maximum number of controlled devices per unit | 8 | 1 | 1 | 1 | 4 | 1 |
| Maximum dispensers per unit | 32 Single product dispensers or any combination of dispenser types up to 32 control wires. | 8 | 8 | 8 | 4 | 8 |
Comments
FE Petro and Red Jacket - The Dispenser Hook Signal is a general indication that any one of eight inputs could be ON or OFF. This is a signal of an active output to the STP motor relay more than an input signal. However, the signal is created by an input (which one?). If more than one STP-DHI box is used per product then the signal could be from any input in either box.